| 1. | This will reduce and equalize mold temperatures .
这样会降低和均衡模具温度。 |
| 2. | Mold temperature is controlled by water flow in cooling channels .
模具温度可用冷却槽中水的流动来控制。 |
| 3. | Maintaining the correct mold temperature becomes more important and may justify mold temperature control equipment .
保持模具有适当温度，越来越显得重要，因而配备模具的温度控制设备是完全合理的。 |
| 4. | Injection molding too satuated molding temperature too low
3模具温度过低。 |
| 5. | The optimal molding temperature and pressure of their composite are 140c and 7 . 3 mpa
麻纤维复合材料的最佳成型温度为140 ，成型压力7 . 3mpa 。 |
| 6. | Normally , reinforced materials require higher mold temperatures than nonreinforced materials
通常，补强的材料需要比没有补强的材料有较高的模温。 |
| 7. | There are many causes , such as fast mold opening , high mold temperature , uneven mold temperature and imbalance of runners
成品变形之原因相当多，如出模太快模温过高模温不均及浇道系统不对称等。 |
| 8. | Higher mold temperatures will achieve a smoother , more blemish - free surface by providing a resin rich skin on reinforced materials
较高的模温会达到较光滑的，更无瑕疵的表面因为补强材料的成型零件会有丰富的表层。 |
| 9. | Process window analysis , another part of mold flow analysis , examines melt temperature , mold temperature , injection pressure , and fill times
加工窗口分析、其它零件的模流分析，检查熔体温度、模具温度、注塑压力和充填时间。 |
| 10. | The shrinkage rate of the product is affected by some manufacturing conditions , such as mold temperature , melting temperature , injection speed and the thickness of products
一些加工条件如模温，熔胶温度，注速与产品厚度会影响产品收缩率炮筒温度cylinder temperatures |
